At 25 cu. ft., the 61362 is the largest-capacity top freezer Kenmore currently sells — the same fundamental single-compressor, top-mounted-freezer layout as its smaller siblings, just moving more air and food volume through it. A cooling complaint here is diagnosed the same way as on the smaller models in this family, starting with the evaporator […]

Kenmore’s Elite refrigerator tier hasn’t been built by one single manufacturer — alongside the LG-built 795-prefix Elite line, Whirlpool also supplied Kenmore Elite French door refrigerators in some production years, on Whirlpool’s own control-board platform and F-series error code format rather than LG’s. The full model and serial plate is what actually settles which platform […]

A garage-ready refrigerator is calibrated to keep cycling correctly across a much wider ambient temperature swing than a standard kitchen model is built for — a genuinely different thermostat and control calibration, not just a marketing label. A standard refrigerator installed in an unheated garage can actually stop cooling the fresh-food section correctly once winter […]

The 111-prefix bottom-freezer line’s builder has varied by production year, so our technicians confirm it from the full model and serial plate rather than assume a single manufacturer — the sealed-system, airflow-damper, and freezer-drawer checks that follow are the same regardless of which company actually built a given unit.

Like the smaller 46-71342, the 46-71352 is built around a wider-range thermostat calibration meant for a garage, basement, or other unheated space rather than a climate-controlled kitchen. Its cooling complaints are diagnosed the same way as a standard top freezer’s, but the ambient installation temperature is checked first, since that’s the variable specific to a […]

As with Kenmore’s other 970-prefix appliances, this refrigerator generation’s actual manufacturer has varied across its production run — confirmed from the model and serial data plate before parts are ordered, then diagnosed with the same compressor, gasket, and airflow checks used across Kenmore’s refrigerator lineup regardless of builder.

A counter-depth refrigerator is built shallower than a standard model so its front sits flush with the surrounding countertops, which means less depth behind the unit for the compressor compartment and ventilation clearance. Because that clearance is tighter by design, keeping the rear vents unobstructed matters more on a counter-depth model like this one than […]

A 363-prefix Kenmore refrigerator is GE-built, the same builder relationship as Kenmore’s 363-prefix dishwashers and ranges. Its control-board error code language and internal sensor layout follow GE’s own refrigerator engineering, distinct from the more common Whirlpool-built 106-prefix platform — which is confirmed from the full model and serial plate before any electronic part is sourced.

At 15.1 cu. ft., the 46-75472 is Kenmore’s smallest current bottom-freezer configuration, putting the compressor and sealed system beneath the fresh-food compartment the same way its larger bottom-freezer siblings do. A warm-running fresh-food complaint on this compact model is checked at the airflow path between the two compartments before assuming a compressor problem.

At 26.6 cu. ft., the 75665 is one of Kenmore’s larger current French door models, and as with other wide French door units, seal alignment across both doors matters more here than on a narrower refrigerator — a door that appears closed but isn’t sealing evenly along the center overlap is a common, overlooked cause […]