What C XX (Kenmore induction cooktop) Means
On this Kenmore induction cooktop the control shows a C followed by two digits, and if the surface is still hot it cycles through C, then the digits, then HE, then repeats. That repeating sequence is one message, not three separate faults.
Common Causes of C XX (Kenmore induction cooktop)
- A coil or sensing fault on the affected zone
- A power electronics fault beneath the glass
- An overheat condition the control has decided to report
🔧 One Safe Check You Can Try
Watch a full repeat of the sequence and note the two digits that follow the C; owners frequently report only the HE part, which is the hot-surface indicator rather than the fault.
⚠ Why You Shouldn't Go Further Than That
- The electronics sit directly under the glass and are live whenever the breaker is on.
- A hot induction surface stays hot after the zone is switched off, which is precisely what the HE part of the sequence is telling you.
- Mistaking the repeating HE for the fault code loses the two digits that actually identify the problem.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.