What F1 E1 (110 / Whirlpool-built VMAX) Means
F1 E1 on the Whirlpool-built VMAX dryer platform Kenmore sells under 110-prefix model numbers means the motor relay on the electronic control board has stuck. The board can no longer be sure it controls when the drum turns, which is why the published remedy is the board itself.
Common Causes of F1 E1 (110 / Whirlpool-built VMAX)
- A motor relay welded closed on the electronic control board
- Surge damage to the control board
- A board at the end of a long life in a hot, lint-laden cabinet
🔧 One Safe Check You Can Try
Switch the dryer off at the breaker rather than the button, and leave it off until it has been looked at — a stuck motor relay is a fault about losing control of a heat-producing appliance, not a performance nuisance.
⚠ Why You Shouldn't Go Further Than That
- A relay that will not open can leave the drum motor energised, which is not a condition to experiment with.
- The control board sits behind the console on live circuits; on a gas model the gas supply is shut off before any panel comes away as well.
- Console access to reach the board may affect what remains of your coverage — check your terms before opening it.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.