What F0 13 / F0 15 / F5 00 / F7 10 (Kenmore glass touch control) Means
Some Kenmore glass-touch ovens show codes with a space in them, which owners often misread. F0 13 and F0 15 report a user interface control board failure, F5 00 a communication failure between that board and the electronic oven control, and F7 10 and its neighbours a failure between the interface board and the glass touch panel.
Common Causes of F0 13 / F0 15 / F5 00 / F7 10 (Kenmore glass touch control)
- A failed user interface control board
- A harness between the interface board and the oven control damaged
- A harness between the interface board and the glass touch panel unseated
🔧 One Safe Check You Can Try
Write the code down exactly, space included; F0 13 and F013 belong to different charts on Kenmore ovens, and the space is what tells a technician which one applies.
⚠ Why You Shouldn't Go Further Than That
- Three separate assemblies can produce these codes, and guessing between them is expensive.
- Let the cavity cool and isolate the oven at the breaker before any fascia is opened.
- A glass touch panel is fragile enough that prising at one to investigate usually ends in replacing it.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.