What F5 E2 (110 / Whirlpool-built) Means
F5 E2 on the 110-prefix Whirlpool-built top-load platform means the lid lock tried to engage and could not finish the movement; the published first check is for debris jamming the mechanism before the assembly itself is condemned.
Common Causes of F5 E2 (110 / Whirlpool-built)
- Debris wedged in the lock recess blocking the strike
- A failed lock motor or solenoid inside the assembly
- A distorted lid or strike that no longer meets the lock squarely
🔧 One Safe Check You Can Try
With the washer unplugged, look into the lock recess at the rim and pick out any lint, coin or bottle cap sitting where the strike has to travel — the recess is external, but the wiring behind it is not, so the cord comes out first.
⚠ Why You Shouldn't Go Further Than That
- Reaching past the recess into the lock body means lifting the top panel, and that panel carries the console wiring with it.
- A lock assembly fitted while a bent strike is the real cause simply fails the same way next week.
- Lifting the top panel to reach the assembly may affect what remains of your coverage — check your terms first.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.