What F1E0 / F1E1 / F1E2 (664-prefix) Means
On 664-prefix Kenmore electric slide-in ranges, the F1E family reports an oven control board failure. The published reset is to disconnect electrical power — either at the plug or at the house breakers for the range — for thirty seconds.
Common Causes of F1E0 / F1E1 / F1E2 (664-prefix)
- An internal failure of the oven control board
- Surge damage from an unstable household supply
- A connector at the board unseated by years of heat cycling
🔧 One Safe Check You Can Try
Shut off the range at the house breakers for at least thirty seconds and restore power; a code that returns immediately has confirmed the board.
⚠ Why You Shouldn't Go Further Than That
- A slide-in range has to be drawn out of the cabinetry to reach most of its electronics, which is a two-person job on a heavy appliance.
- The oven control carries line voltage and the cavity behind it stays hot for hours after use.
- Console access may affect any remaining coverage — check your terms before you start.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.