What F32 / F35 (110 / Whirlpool-built front-load) Means
F32 and F35 are grouped on the Whirlpool-built 110-prefix front-load platform as a failure of the water level sensor circuit — the control has lost a trustworthy answer to the simple question of how much water is in the tub.
Common Causes of F32 / F35 (110 / Whirlpool-built front-load)
- The pressure hose between tub and sensor split, kinked or blocked
- A failed water level sensor
- A broken connection between the sensor and the main control board
🔧 One Safe Check You Can Try
Watch a cycle through the glass and note whether the tub takes barely any water or floods past the door seal; the direction of the error is a genuinely useful clue.
⚠ Why You Shouldn't Go Further Than That
- The sensor and its hose sit under the top panel next to live boards, so the cord comes out before the panel does.
- A hose blocked with detergent sludge mimics a dead sensor exactly, and the two repairs cost very different amounts.
- A pressure hose refitted without a proper seal produces the same fault on the very next cycle.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.